Equipment Search







K1C EDM Drill (2004/9-rebuilt)




Specs:

  • Table Size (W XD) -------------------------------------- 9.8" X 13.8" (250mm x 350mm)
  • X Travel (Manual) --------------------------------------- 7.9" (200mm)
  • Y Travel (Manual) --------------------------------------- 11.9"(300mm)
  • W Axis (Vertical Travel) -------------------------------- 9.1" (230mm)
  • Z Axis Travel ----------------------------------------------- 11.81" (300mm)
  • Maximum Work piece Weight -------------------------- 220 lbs (100kg)
  • Maximum Work piece Dimension (W X D X H) ---- 9.8" X 13.8" X 9.4"
  • Electrode Diameter Range ------------------------------ 0.008"~.118"
  • Maximum Distance from Worktable to Guide ----- 9.600” (245mm)
  • External Dimension (W X D X H) --------------------- 33.9" X 32.7" X 78.3" (860mmx830mmx11990mm)
  • Area Required (W X D) ---------------------------------- 57.5" X 64.2" (1,460mm x 1,630mm)
  • Machine Weight ------------------------------------------ 1,100 lbs (500 kg)
  • Power Consumption ------------------------------------- 3.3 KVA

DIELECTRIC SYSTEM

  • Fluid Capacity ------------------------------------------- 5.3 gal (20L)
  • Fluid Type ------------------------------------------------ Vitol-KS
  • Dielectric Reservoir ------------------------------------- Built-In
  • Filtering System ----------------------------------------- Replaceable foam rubber filter

POWER SUPPLY

  • Voltage Requirements ---------------------------------- 3 Phase, 200V/220Vac 60 Hz
  • Pulse Generating Method ----------------------------- Power FET
  • (Field Effect Transistor)
  • Maximum Machining Current ----------------------- 30 Amps
  • Machining Current Selection ------------------------- 15 Steps
  • Pulse Width Selection ---------------------------------- On/Off each 15 steps





Inquiry








Captcha Image


  • RS-232C/LAN interface